Every home needs a bathroom. Small bathrooms might seem cramped and be hard to clean. Ordinary floor toilets frequently take up too much space, which restricts mobility. A lot of homeowners are looking for fixtures that look trendy while saving space. Wall Hung toilets solve this issue by creating a clean, open design. This article lists their pros, cons, and simple installation tips. At the end, you will determine if a wall hung toilet suits your remodel. Read on to find out if these toilets would work in your home.
Pros of Wall Hung Toilets
Wall hung toilets are becoming increasingly popular and for good reasons. Here are some of their standout benefits:
-
Space-Saving Design
The tank is hidden inside the wall to save space. This design gives about 8 to 10 more inches of floor. In a small bathroom, this space can fit storage or a sink. With the floor open, cleaning and walking around are easier. You can also place a stool or a basket under the toilet.
-
Modern Look
Most parts stay hidden, so the toilet looks clean and simple. The bowl attaches to the wall while pipes and the tank are concealed. This creates a smooth and neat bathroom style. Toilets come in many shapes, colors, and flush plates. You can also add shelves or tiles to use the extra wall space.
-
Easy to Clean
Because the toilet hangs, there are no corners below it. Sweeping and mopping under the toilet becomes very simple. With fewer gaps, mold and dirt are less likely to form. This helps in homes with kids or pets where spills are common.
-
Adjustable Height
You can set the toilet height to match your needs. Most are placed 15 to 19 inches from the floor. Lower heights are better for children, while higher ones help adults. Many models follow ADA rules with a 17 to 19-inch seat. These rules are helpful for people who need extra support.
-
Reduced Noise
The tank is inside the wall, which makes flushing quieter. This is useful for bathrooms close to bedrooms or living rooms. Some toilets also have padding to block noise and reduce vibration. A strong frame and tank further help reduce flushing sound.
Cons of Wall Hung Toilets
Wall-hung toilets have several disadvantages to think about before buying one:
-
Complex Installation
Installing a wall hung toilet is harder than fitting a standard toilet. It requires cutting drywall, adding a steel carrier, and reinforcing wall studs, usually 2×6 spaced 16 inches apart. A plumber may need 6–8 hours of work, costing about $80–$120 per hour.
-
Concealed Tank Repairs
The hidden tank gives a clean look but makes repairs more difficult. Without a 12×12‑inch access panel, fixing parts like the fill valve may require cutting into the wall.
-
Periodic Bolt Tightening
Flush pressure and body weight can loosen mounting bolts over time. Bolts should be checked and tightened yearly. This takes about 15 minutes with simple tools.
-
Higher Cost
Basic bowls cost $600–$1,000, and installation ranges from $800–$2,000. By comparison, floor toilets cost $150–$300, plus $150–$400 for installation.
-
Weight Limits
Most frames hold up to 500 lb, while heavy‑duty models can support 800 lb. If you surpass these limits– the frame may bend or damage the tiles around it.
-
Limited Styles
Wall hung models come in fewer shapes, sizes, and colors compared with floor toilets. Finding a specific style or color may be harder.
Installation Tips for Wall Hung Toilets
Toilets that are wall-hung require cautious installation. Although hiring an expert is preferable, understanding the procedures aids in the process. Here are five simple steps for a strong and working installation.
1. Prepare the Area
Check if the wall is strong enough to hold the toilet. In case the wall feels weak, additional wooden beams should be added. It is also essential to position the water and drain pipes near the toilet. Also verify that the frame fits well against each of the wall studs. Mark the frame location to avoid mistakes when cutting.
2. Install the Carrier Frame
The carrier frame holds both the tank and the toilet bowl. Place the frame between the studs using the guide from the manual. For support, fasten it securely to the wall and the ground. To make sure the frame is even and straight, use a level tool. To keep the frame sturdy on an uneven floor, insert shims underneath it.
3. Connect the Pipes
Attach the water line to the tank connection. Connect the drain pipe to the waste outlet opening. To prevent leaks, wrap Teflon tape around threaded joints. Make sure the fittings are tight, but be careful–over-tightening can damage plastic components. Then turn the water on slowly and check for leaks at each joint. It's also a good idea to have a towel or bucket nearby in case of drips.
4. Cover the Frame
After testing, cover the frame with drywall or tiles. Use moisture‑resistant drywall for areas exposed to water. Mark the opening for the flush plate before cutting. Be sure to add extra support if you anticipate attaching shelves in the future. When making holes, be careful and seal all the edges with waterproof sealant. This can help keep water from getting into the walls.
5. Attach the Toilet Bowl
Finally, place the toilet bowl on the mounting rods of the frame. Make sure it is aligned and secure it with bolts. Use a level to confirm the bowl sits evenly. Tighten the bolts once the bowl is in the correct position. Then, install the toilet seat and lid following the instructions. Flush the system several times to check the water flow and for any leaks. Repair or replace alignment or seals if problems arise before completing the work.
Conclusion
Wall-hung toilets are a clever option for saving space and giving bathrooms that sleek, modern look. They let you pick the height, plus cleaning around them is easier than with traditional floor models. On the flip side they do cost more and need a professional for installation. But with the right care plus yearly check-ups they can work beautifully for many years.
Ready to upgrade your bathroom? Explore our collection of wall hung toilets and find the right one for your home.
